From PRAGMAgridWIKI

General information of SCMSWeb Probe Configuration for PRAGMA grid

• Create directory in /usr/share/scmsweb to hold your probe configuration

mkdir -p /usr/share/scmsweb/grid/PRAGMA

• Create a file called "probe.conf" inside the directory

cat >> /usr/share/scmsweb/grid/PRAGMA/probe.conf << EOF
[html]
xmlpath = /usr/share/scmsweb/incoming/cluster/pragma.xml
textpath = /usr/share/scmsweb/grid/PRAGMA/pragma.txt
htmlpath = /usr/share/scmsweb/grid/PRAGMA/pragma.html

[probe]
target = http://goc.pragma-grid.net/cgi-bin/scmsweb/probe.cgi?target=PRAGMA
name = PRAGMA
smtp = localhost
timeout = 40
probe0 = DNS
probe1 = Iperf 
#probe2 = Authentication
#probe3 = Mds
#probe4 = JobRun
#probe5 = GridFTPTo
#probe6 = GridFTPFrom
#probe7 = Gfarm 
#probe8 = WSGRAM
   
[globus]
basedn = mds-vo-name=npaci,o=sdsc
mdshost = rocks-67.sdsc.edu

[Gfarm]
command = /usr/share/scmsweb/gfarm/probe_gfhost %(target)s

[WSGRAM]
command = /usr/share/scmsweb/wsgram/probe_wsgram %(target)s

EOF

Line starting with '#' is comment. The [globus], [Gfarm], and [WSGRAM] part is not important and you can omit it for now. It's define how we'll test Gfarm and WSGram probe. You'll need probe_gfhost and probe_wsgram in this case.

Also, make sure that http://goc.pragma-grid.net/cgi-bin/scmsweb/probe.cgi?target=PRAGMA is accessible from your cluster. If you need to configure firewall and some other networking things, do that to make the probe works.

• Now run scmsweb-probe-cs once to make probe data appear

scmsweb-probe-cs

• Take a look at your probe page (Monitoring->Probe). Probe result should be available.
• After a while, GOC will collect ALL the result and displayed at goc.pragma-grid.net/scmsweb. Please also look at the "Bandwidth" (Monitoring->Bandwidth) page for its correctness.

If you have any problem, please contact zhengc@sdsc.edu or sugree_ph@thaigrid.or.th or somsak_sr@thaigrid.or.th.